Spike-Aware Remaining Useful Life Prediction for Industrial Equipment Under Sparse Failure Data

Authors

  • Sujin Gong Faculty of Engineering and Information Technology, University of Technology Sydney, Sydney, Australia
  • Hyerin Ha Faculty of Engineering and Information Technology, University of Technology Sydney, Sydney, Australia
  • Emi Hayashi Faculty of Engineering and Information Technology, University of Technology Sydney, Sydney, Australia
  • Elodie Gauthier Faculty of Engineering and Information Technology, University of Technology Sydney, Sydney, Australia

Keywords:

Remaining Useful Life, Spike-Aware Networks, Sparse Data, Predictive Maintenance

Abstract

The accurate prediction of remaining useful life for industrial equipment is a cornerstone of modern predictive maintenance paradigms. However, the development of robust prognostic models is frequently hindered by the inherent sparsity of run-to-failure data in real-world industrial settings, where catastrophic failures are actively prevented through conservative maintenance schedules. This paper introduces a novel spike-aware remaining useful life prediction framework designed specifically to operate under conditions of severe data sparsity. By leveraging the principles of neuromorphic computing, the proposed methodology transforms continuous multivariate sensor signals into discrete, event-driven spike trains. This encoding process naturally filters background noise and emphasizes critical transient degradation signatures that precede equipment failure. The core predictive engine utilizes a specialized spiking neural network architecture, optimized through surrogate gradient techniques, to capture long-term temporal dependencies within the sparse feature space. Furthermore, the event-driven nature of the spike-aware model provides significant computational efficiency, rendering it suitable for eventual edge-device deployment. Comprehensive evaluations using a simulated industrial degradation dataset demonstrate that the proposed spike-aware framework consistently outperforms traditional deep learning approaches, particularly when the available training data contains highly limited failure trajectories. The results indicate superior generalization capabilities, reduced prediction error margins, and enhanced robustness against sensor noise, offering a highly viable solution for industrial prognostics and health management systems facing critical data scarcity challenges.

References

1. Bao, Zerui, et al. "SLOFetch: Compressed-Hierarchical Instruction Prefetching for Cloud Microservices." arXiv preprint arXiv:2511.04774 (2025).

2. DeCandia, G., Hastorun, D., Jampani, M., Kakulapati, G., Lakshman, A., Pilchin, A., et al. (2007). Dynamo: Amazon’s highly available key-value store. In Proceedings of SOSP.

3. Li, C., Xu, J., & Xing, J. (2023). A frequency feature extraction method based on convolutional neural network for recognition of incipient fault. IEEE Sensors Journal, 24(1), 564-572.

4. Sigelman, B. H., Barroso, L. A., Burrows, M., Stephenson, P., Plakal, M., Beaver, D., et al. (2010). Dapper, a large-scale distributed systems tracing infrastructure. Technical Report, Google.

5. Gu, D., Zhu, Y., Luković, M., & Pan, J. (2026). Arch action and beam action in reinforced engineered cementitious composite (ECC) beams subjected to shear. Engineering Structures, 357, 122468.

6. Zhang, S., Yang, S., Zhang, W., Xiong, Y., & Yao, S. (2026). Hybrid Beamforming for Subarray-Level Movable Antenna Enhanced MU-MIMO Communications. IEEE Wireless Communications Letters, 15, 2559-2563.

7. Li, Y., Zhao, Y., Yuen, C., Qin, X., Clenson, C., Du, C., & Guan, Y. L. (2025). A novel design of varactor-based RIS: Achieving low-profile, wideband, and continuous phase control. IEEE Antennas and Wireless Propagation Letters.

8. Ren, Y., Zeng, C., Fan, D., Liu, L., & Feng, Q. (2018). Multi-state reliability assessment method based on the MDD-GO model. IEEE Access, 6, 5151-5161.

9. Jing, F., Ye, Y., Zhou, Y., Zhou, H., Xu, Z., Lu, Y., ... & Wu, D. (2022). Modelling the geographical spread of HIV among MSM in Guangdong, China: a metapopulation model considering the impact of pre-exposure prophylaxis. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 380(2214).

10. Burns, B., Grant, B., Oppenheimer, D., Brewer, E., & Wilkes, J. (2016). Borg, Omega, and Kubernetes. Communications of the ACM, 59(5), 50–57.

11. Xing, J., & Xu, J. (2022). An improved incipient fault diagnosis method of bearing damage based on hierarchical multi-scale reverse dispersion entropy. Entropy, 24(6), 770.

12. Yao, Y., Zhang, W., & Li, M. (2026). Cloud-Edge Federated Incremental Learning Framework for PMSM Efficiency Optimization with Lightweight CNN-LSTM Models and OTA Differential Deployment. Journal of Computer Science and Frontier Technologies, 3(1), 98-111.

13. Ismail, A. M., Zhao, Y., Wang, Z., Guan, Y. L., & Yuen, C. (2025). Visually steered reconfigurable intelligent surface-assisted mobile communications. IEEE Antennas and Wireless Propagation Letters.

14. Li, K., Ren, Y., Fan, D., Liu, L., Wang, Z., & Ma, Z. (2018). Enhance GO methodology for reliability analysis of the closed-loop system using Cyclic Bayesian Networks. Mechanical Systems and Signal Processing, 113, 237-252.

15. Zhang, W. (2026). A 5-6 GHz PVT Robust Current Mode Passive Mixer for Direct Down-Conversion Receiver.

16. Guo, J., Wang, Z., Pu, J., Tian, W., Duan, G., & Luo, G. (2025). Multi-Perspective Dialogue Non-Quota Selection with loss monitoring for dialogue state tracking. Expert Systems with Applications, 283, 127516.

17. Zhang, W., Luo, M., & Chen, Z. (2024, October). Hybrid Forecasting: ML Predictions of Lake-Effect Regional Extreme Precipitations. In 2024 7th International Conference on Universal Village (UV) (pp. 1-11). IEEE.

18. Fan, D., Lin, J., Cai, B., & Liu, B. (2021). Robustness of maintenance support service networks: Attributes, evaluation and improvement. Reliability Engineering & System Safety, 210, 107526.

19. Fan, D., Liu, M., Hai, X., Ren, Y., & Feng, Q. (2024). Higher-order rewiring strategy for enhancing robustness of multiplex aviation networks. IEEE transactions on network science and engineering, 11(6), 6417-6430.

20. Gu, D., Xu, H., Huang, Y., Zhu, Y., Pan, J., & Luković, M. (2024). Shear crack kinematics in reinforced engineered cementitious composite (ECC) beams. Case Studies in Construction Materials, 21, e03587.

21. Zhang, S., & Yan, W. (2025). In-trainNet: A Two-Step Data-Driven Framework for Enhancing Railway In-Train Forces Monitoring. Advanced Engineering Informatics, 65, 103352.

22. Lijun, X., Yehui, Z., Yue, S., Fanglei, Z., Honghua, J., & Guangming, W. (2022). Research on the current situation of continuously variable transmission and electric drive technology. Journal of Chinese Agricultural Mechanization, 43(7), 81.

23. Fan, J., Liang, W., & Zhang, W. Q. (2025). SARNet: A Spike-Aware consecutive validation Framework for Accurate Remaining Useful Life Prediction. arXiv preprint arXiv:2510.22955.

24. Liu, L., Fan, D., Wang, Z., Yang, D., Cui, J., Ma, X., & Ren, Y. (2019). Enhanced GO methodology to support failure mode, effects and criticality analysis. Journal of Intelligent Manufacturing, 30(3), 1451-1468.

25. Gu, D., Sun, Y., Hu, J., Lu, R., & Pan, J. (2026). Rheology-and fracture-guided design of lightweight spray-applied engineered cementitious composites achieving structural-grade strength and high tensile ductility. Journal of Building Engineering, 116100.

26. Lv, Qi, et al. "Spatial-temporal graph diffusion policy with kinematic modeling for bimanual robotic manipulation." Proceedings of the Computer Vision and Pattern Recognition Conference. 2025.

27. Xing, J., & Xu, J. (2022). An improved convolutional neural network for recognition of incipient faults. IEEE Sensors Journal, 22(16), 16314-16322.

28. Corbett, J. C., Dean, J., Epstein, M., Fikes, A., Frost, C., Furman, J. J., et al. (2013). Spanner: Google’s globally-distributed database. ACM Transactions on Computer Systems, 31(3), Article 8.

29. Zhang, C., Jiang, X., & Zhao, Y. (2021). Efficient instantaneous channel propagation modeling for aeronautical communications systems with compressed sensing. IEEE Transactions on Antennas and Propagation, 70(2), 1211-1220.

Downloads

Published

2026-05-01